Jump to content

12/9/18:
   Should you happen to have any troubles at all with registration, posting, photo uploads, etc... Please contact us via the Support Tab, or on our Facebook Page. Thank you for your continued support!
 

Welcome:
    Welcome to the new and improved Virginia Off Road Sports! Please stick around and join us in becoming one of the #1 Online Communities for Off Road Hobbies such as Jeeping, Mudding, Dirt Bikes and more!

 

Click or hover over image to zoom in

1 Ton Tie Rod Crossover Steering Kit

(0 reviews)
$236.00
Barnes 4wd is proud to offer the best crossover steering kit on the market, complete with high quality 1 ton tie rod ends.  This kit is a huge upgrade over your stock steering, bigger tie rod ends, stronger 1.5"O.D. x 1/4" wall D.O.M..  All of the inserts in this kit have a machined hex, so all of your steering adjustments can be made with an open end wrench.
About the tie rods:
Standard tie rod ends:  The standard tie rod ends are a high quality heavy duty version of the GM 1 ton tie rod ends (part# ES2234L, ES2234R).  
High angle tie rod end for the pitman arm:  Since the tie rod end at the pitman arm generally sees more misalignment than the rest of the steering system the high angle joint is usually the best here.  The taper on the high angle tie rod end is also larger but the same angle (7° or 1.5" per ft) so you may have to ream your pitman arm deeper to accommodate this tie rod end, we offer the reamer here. 
Here are the parts that are included with each kit:
2  1.5"O.D. x 1/4" Wall D.O.M. 54" Long 
2 Right Hand Thread 7/8"-18 Hex Tube Inserts
2 Left Hand Thread 7/8"-18 Hex Tube Inserts
2 Right Hand Thread 7/8"-18 Jam Nuts
2 Left Hand Thread 7/8"-18 Jam Nuts
4 Tie Rod Ends

About 1 Ton Tie Rod Crossover Steering Kit

Cross-Over-Steering-Kit-High-Angle.jpg.b3b2f6bffb34197e33fc8c5d74874ea5.jpgBarnes 4wd is proud to offer the best crossover steering kit on the market, complete with high quality 1 ton tie rod ends.  This kit is a huge upgrade over your stock steering, bigger tie rod ends, stronger 1.5"O.D. x 1/4" wall D.O.M..  All of the inserts in this kit have a machined hex, so all of your steering adjustments can be made with an open end wrench.

About the tie rods:

Standard tie rod ends:  The standard tie rod ends are a high quality heavy duty version of the GM 1 ton tie rod ends (part# ES2234L, ES2234R).  
High angle tie rod end for the pitman arm:  Since the tie rod end at the pitman arm generally sees more misalignment than the rest of the steering system the high angle joint is usually the best here.  The taper on the high angle tie rod end is also larger but the same angle (7° or 1.5" per ft) so you may have to ream your pitman arm deeper to accommodate this tie rod end, we offer the reamer here. 

Here are the parts that are included with each kit:

2  1.5"O.D. x 1/4" Wall D.O.M. 54" Long 
2 Right Hand Thread 7/8"-18 Hex Tube Inserts
2 Left Hand Thread 7/8"-18 Hex Tube Inserts
2 Right Hand Thread 7/8"-18 Jam Nuts
2 Left Hand Thread 7/8"-18 Jam Nuts
4 Tie Rod Ends

There are no reviews to display.

×
×
  • Create New...